Extension Detection; On-Line Extension Protection - Command Communications ASAP 104 Installation And Reference Manual

═════════════════════════════════════════════════════════════════

Extension Detection

Extension Detection provides a method to interrupt call processing from an extension phone and operates only in the
Automatic mode.
With Extension Detection turned OFF, the ASAP 104 does not detect extension phones (phones not connected to the ASAP
104) going off-hook during a call. When answering a call from an extension phone, you will hear the ASAP 104 ringing the
selected port. Pressing the * key on an extension phone stops the ASAP 104 from ringing the port and gives control of the
call to the extension phone.
If Extension Detection is turned ON, the ASAP 104 will detect an extension phone going off-hook and stop ringing the
port. The extension phone now has control of the call.
The factory setting for Extension Detection is OFF.
To turn this feature ON:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 1 4 * (three
beeps) * (one beep)
3. Hang up the phone
═════════════════════════════════════════════════════════════════

On-Line Extension Protection

Operates in either the Automatic mode or the Semi-Automatic mode.
This feature allows the ASAP 104 to detect when an extension phone (not connected to the ASAP 104) goes off-hook to
place a call. Once the extension phone is on-line, any device connected to the ASAP 104 cannot access the phone line. The
device simply receives a busy signal until the extension phone has disconnected from the call.
NOTE: Phones or data devices connected directly to the ASAP 104 do not require this feature as the ASAP 104 maintains
exclusion between ports.
If On-Line Extension Protection is turned OFF, a device connected to another port of the ASAP 104 will interrupt a call
from any extension phone.
The factory setting for On-Line Extension Protection is ON.
To turn this feature OFF:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 0 5 * (three
beeps) * (one beep)
3. Hang up the phone
To turn this feature OFF:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 0 4 * (three beeps) *
(one beep)
3. Hang up the phone
To turn this feature ON:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 1 5 * (three beeps) *
(one beep)
3. Hang up the phone
25