Answer Any Port; Pound Key Transfer Required - Command Communications ASAP 104 Installation And Reference Manual

═════════════════════════════════════════════════════════════════

Answer Any Port

Operates in either the Automatic mode or the Semi-Automatic mode.
When a call comes in, the Answer Any Port feature allows any port that is not ringing to answer the call. Once the call is
answered, the ASAP 104 listens for tone access codes to transfer the call to another port.
Conditions that allow the Answer Any Port feature to
operate:
1. Any time between ring signals to the Primary port
2. After a No Answer Transfer occurs
3. When Distinctive Ring Service Detection is activated
(In the Semi-Automatic mode, Single Tone Detection will be activated when a device answers a call.)
The factory setting for the Answer Any Port feature is OFF.
To turn this feature ON:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 1 6 * (three beeps) * (one
beep)
3. Hang up the phone
═════════════════════════════════════════════════════════════════

Pound Key Transfer Required

Operates in either the Automatic mode or the Semi-Automatic mode.
This feature allows the ASAP 104 to determine whether or not the # key is required on an inbound call to transfer to a port, or for
entering the remote programming mode using the Security Access Code.
If this feature is turned OFF, you or the caller can transfer a call to any port on the ASAP 104 by entering the access code
required for the port without entering the # key. However, if an incorrect access code is entered, the caller can re-enter the access
code with the # key included to complete a transfer.
With this feature turned ON, if an incorrect access code is entered, you or the caller can simply re-enter the access code (with the
# key) to transfer the call.
The factory setting for the Pound Key Transfer Required feature is ON.
To turn this feature OFF:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 0 8 * (three beeps) * (one
beep)
3. Hang up the phone
Conditions that restrict the Answer Any Port feature:
1. Automatic Primary Port Transfer
2. Single frequency tone transfer
3. Tone Access code transfer
To turn this feature OFF:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 0 6 * (three beeps) * (one
beep)
3. Hang up the phone
To turn this feature ON:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 1 8 * (three beeps) * (one
beep)
3. Hang up the phone
26