Single Tone Detection; Fax Cng (Calling) Tone Detection - Command Communications ASAP 104 Installation And Reference Manual

═════════════════════════════════════════════════════════════════

Single Tone Detection

Operates in either the Automatic mode or the Semi-Automatic mode.
This feature allows the ASAP 104 to detect single frequency tones (for the duration of the Single Tone Detection Timer) from
various data devices. It recognizes the following tones:
•
•
Operation in the Automatic mode and Semi-Automatic mode vary as follows:
Automatic mode
Once the ASAP 104 answers a call, it will listen for and transfer calls when a single frequency tone is detected. The Single Tone
Detection Timer begins when the ASAP 104 answers the call. After the timer expires, the ASAP 104 will only transfer using the
tone access codes.
Semi-Automatic mode
The Single Tone Detection Timer begins when the call is answered. Once the call is answered, the ASAP 104 will listen for and
transfer calls when a single frequency tone is detected. After the timer expires, transfers will require tone access codes.
The factory setting for Single Tone Detection is ON.
To turn this feature OFF:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 0 9 * (three beeps) * (one
beep)
3. Hang up the phone
NOTE: This feature supersedes the following features: Fax CNG Detection, Modem Calling
Tone Detection. If Single Tone Detection is turned OFF, these features will not operate even if they are programmed ON.
═════════════════════════════════════════════════════════════════

Fax CNG (Calling) Tone Detection

Operates in either the Automatic mode or the Semi-Automatic mode.
This feature allows the ASAP 104 to detect an 1100 Hz Fax CNG tone.
Operation in the Automatic mode and Semi-Automatic mode varies as follows:
Automatic mode
Once the ASAP 104 answers a call, it will listen for and transfer calls when a CNG tone is detected.
Semi-Automatic mode
Once a call is answered, the ASAP 104 will listen for and transfer calls when a CNG tone is detected.
The factory setting for Fax CNG Tone Detection is ON.
To turn this feature OFF:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 0 1 0 * (three beeps) *
(one beep)
3. Hang up the phone
1100Hz Fax CNG tone (if turned ON)
1300Hz modem calling tone (if turned ON)
To turn this feature ON:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 1 9 * (three beeps) * (one
beep)
3. Hang up the phone
To turn this feature ON:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 1 1 0 * (three beeps) *
(one beep)
3. Hang up the phone
27