Port P2 Transfer Code; Port P3 Transfer Code; Port P4 Transfer Code - Command Communications ASAP 104 Installation And Reference Manual

═════════════════════════════════════════════════════════════════

Port P2 Transfer Code

Operates in either the Automatic mode or the Semi-Automatic mode.
This feature designates the tone access code that will be required to transfer a call to port P2.
The Port P2 Transfer Code can be any numeric 1-4 digits not including the # key. See Pound Key Transfer Required for
use with the Port P2 Transfer Code. Do not use a code that is a transfer code for another port on the ASAP 104.
The factory setting for the Port P2 Transfer Code is 2 2.
To enter a new access code, perform the following steps:
A code of 0 0 0 0 will disable tone access.
═════════════════════════════════════════════════════════════════

Port P3 Transfer Code

Operates in either the Automatic mode or the Semi-Automatic mode.
This feature designates the tone access code that will be required to transfer a call to port P3.
The Port P3 Transfer Code can be any numeric 1-4 digits not including the # key. See Pound Key Transfer Required for
use with the Port P2 Transfer Code. Do not use a code that is a transfer code for another port on the ASAP 104.
The factory setting for the Port P3Transfer Code is 3 3.
To enter a new access code, perform the following steps:
A code of 0 0 0 0 will disable tone access.
═════════════════════════════════════════════════════════════════

Port P4 Transfer Code

Operates in either the Automatic mode or the Semi-Automatic mode.
This feature designates the tone access code that will be required to transfer a call to port P4.
The Port P4 Transfer Code can be any numeric 1-4 digits not including the # key. See Pound Key Transfer Required for
use with the Port P4 Transfer Code. Do not use a code that is a transfer code for another port on the ASAP 104.
The factory setting for the Port P4 Transfer Code is 4 4.
To enter a new access code, perform the following steps:
A code of 0 0 0 0 will disable tone access.
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 6 2 _ _ _ _ * (three beeps) * (one beep) (blank spaces represent the new Port
P2 Transfer Code)
3. Hang up the phone
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 6 3 _ _ _ _ * (three beeps) * (one beep) (blank spaces represent the new Port
P3 Transfer Code)
3. Hang up the phone
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 6 4 _ _ _ _ * (three beeps) * (one beep) (blank spaces represent the new Port
P4 Transfer Code)
3. Hang up the phone
35