Matrix SETU VGFX Quick Start Manual page 34

@ Dial # as end of dialing if end of dialing digit is programmed or wait till
expiry of inter digit wait timer.
System Commands
Description
To Program Network IP Address
To Program Network Subnet Mask
To Program the Connection Type
To Enable/Disable VLAN tag
To Display the Connection Type
To Display the Network IP Address
To Display the Network Subnet Mask
To Display the Network Gateway Address
To Display the DNS Address
To Display the Signal Strength of the GSM Network
To Display the Status of SIP Accounts
System Commands
11-IP Address-#*
12-Subnet Mask-#*
10-Code-#*
31-Code-#*
20-#*-Go On-Hook
21-#*-Go On-Hook
22-#*-Go On-Hook
23-#*-Go On-Hook
24-#*-Go On-Hook
26-Mobile Port-#*
27-SIP Accounts-#*