Table of Contents
Advertisement
•
Network Operator Code: If mode programmed for network selection is
'Manual' then program network operator code and set the priority for network
operators with which the SIM can get registered.
Maximum Length = 8 digits
Default = Blank.
In Manual mode for network selection, SIM Card will be registered only with
the network that is supported by the network operator of the SIM Card used
in the system.
(Refer 'Mobile Network Selection' in System Manual for more details).
Step6: SIP Trunk Parameters
Click on 'SIP Trunk Parameters 1' link and program the following parameters.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SETU VGFX and is the answer not in the manual?