MUTOH VJ-628 ValueJet Operation Manual page 73

Emergency mode
When a serious error happens, the data LED and error LED in the operation panel flash simultaneously, and the buzzer sounds
in a fixed interval.
[1]
[2]
Check the serious error contents with VSM.
"Checking failure contents of the emergency mode" on page 74
• After checking it, proceed to step 5.
• When the status monitor cannot be viewed, proceed to step 3.
[3]
[4]
Count the number of buzzer sounds (or number of short flashes of LED).
• Error number is 3 digits.
• Long sounding buzzer indicates a digit of error number, and the short sounding buzzer after the long buzzer indicates
error number.
• For example, the No. 154 error shows the next pattern.
3 long, 1 short, 2 long, 5 short, 1 long, 4 short, 3 long.
Buzzer Beep
Error LED
Data LED
Note
• The pattern will not repeat. To check it again, short press the operation key on the operation panel.
• If error number of a digit is "0", a long buzzer (buzzer indicating a digit), then after having no sound for a fixed time, a long buzzer
indicating the next digit sounds. For LED, there is a long flash only, and it moves on to a long flash without having a short flash.
[5]
Check the followings.
• Open the front cover and if media is jammed, remove it.
• If there is a replaced part, check it is installed correctly.
[6]
Turn the power of this product OFF. Wait for 10 seconds or more and turn the power ON.
If the same error occurs after re-launching, please contact your local MUTOH dealer.
Press!
Press!
1
3rd digit 2nd digit
Beep Beep Be Beep
Short press the operation key on the operation panel, when the
buzzer continues sounding.
• The buzzer stops.
When the status monitor cannot be viewed, short press the operation
key on the operation panel again.
• LED flashes and the buzzer sounds in a regular pattern.
The pattern indicates error number.
5
1st digit
Beep Be Be Be Be Be Beep
4
End
Be Be Be Be Beep Beep
Handling messages/error messages
Beep
73