MUTOH VJ-628 ValueJet Operation Manual page 54

[5]
[6]
Open the front cover.
Important!
When cleaning the cleaning wiper, please note the followings.
• Use a cleaning stick in dry condition. If moisten with water or solution, it can cause damage to the print head.
• Do not reuse a cleaning stick. Dusts can adhere causing damage to the print head.
• Standard cleaning time should be within 5 minutes. If it takes longer, the stick can dry causing damage to the print head.
[7]
[8]
[9]
[10]
Close the front cover.
[11]
54 Cleaning of cleaning wiper
Press!
Press!
Short press the operation key on the operation panel.
• The carriage moves to the maintenance position inside the front
cover.
Wipe the cleaning wiper with a cleaning stick.
• Wipe the left side surface of cleaning wiper going back and forth.
Wipe the right side surface of cleaning wiper going back and forth.
Wipe the right side surface of the base of cleaning wiper going back
and forth.
Short press the operation key on the operation panel.
• The carriage moves to the original position inside the front cover.