Troubleshooting
4
Troubleshooting
Handling messages/error messages
Checking message/error/warning
VSM is used to check error/warning when problem happens and to check messages while the product is operating correctly.
[1]
Launch VSM.
"Launching VSM" on page 9
[2]
Check [Status Info.].
• Message/error/warning contents are displayed.
• When countermeasures are displayed, follow them.
Note
• When the remote panel of VSM is launched, it can be also checked in [Printer Status] - [Status Info.].
• Operations may be temporarily paused when an error occurs. When an error is corrected, it restarts the operation.
Error display of operation panel
The error LED in the operation panel becomes ON (flashes in warning state), and a buzzer sounds.
[1]
[2]
Check error/warning contents with VSM and handle the error/warning.
"Checking message/error/warning" on page 72
72
Handling messages/error messages
Press!
Short press the operation key on the operation panel, when the
buzzer continues sounding.
• The buzzer stops.