[3]
[4]
Click [Start].
[5]
[6]
Open the front cover.
[7]
[8]
Press!
Click [CR Maintenance].
• The VSM remote panel opens.
Note
• VSM can be launched directly.
"Launching VSM" on page 9
Short press the operation key on the operation panel.
• The carriage moves to the maintenance position inside the front
cover.
Remove the absorption material for the flushing box.
• Pull the tab up of the absorption material for the flushing box, and
release the hook.
Important!
When removing the absorption material for the flushing box, be cautious of
ink drops.
Attach new absorption material for the flushing box.
Replacing absorption material for the flushing box
59