INstAllAtIoN of tHE ApplIANcE (coNtINUED)
to convert the free standing appliance to a slot in
installation the kick panel provided on the appliance
is removed and the appliance is mounted on a plinth .
this enables a continuous cupboard kick board to
be installed, giving a more integrated appearance .
there is no clearance requirement between oven and
adjacent side cabinets .
to remove the appliance kick panel
• R emove all loose parts ie. Burner crowns & caps,
trivets, oven shelves .
• C arefully lay down the appliance onto one side onto
foam packaging and remove the screws as shown
from each corner bracket .
this surface is to be
level with the top edge
of the kickboard
remove 4 screws on
each corner bracket