Table of Contents
Advertisement
Storage Estimator
Background Information
Document 800-07766V4 Rev A
01/2013
Note
After installing the Rapid Eye software, documentation about Rapid Eye
Hybrid LT is available at the operator's PC. Click Start
Rapid Eye Hybrid LT x.x
the document you want to view).
Web Site
To learn more about Honeywell products that can be used with your Rapid Eye Hybrid LT
system or to consult our library of user documentation, go to www.honeywellvideo.com.
The Storage Estimator is installed along with the Rapid Eye software. To run the storage
estimator, install the Rapid Eye software, and then:
1.
Select the Start menu
2.
Click Storage Estimator.
3.
Click OK on the About Storage Estimator window that appears.
4.
Change the recording options in the Estimator, as needed, and click Apply Options
to obtain an estimate of your system's storage capacity (see the
HD and Hybrid LT Digital Video Recorders System Administrator
information on the storage estimator).
Caution
Effective video feeds are a major component of any CCTV system.
Planning for camera position, distance from subject, angle and lighting
can be as critical as operating your DVR. For audio: planning microphone
position, distance from subject and alarm bells can also be critical.
Consult your camera and audio suppliers for optimal hardware setup.
Caution
In LocalView, if the language settings are changed more than fifty (50)
times, Honeywell recommends rebooting the Rapid Eye DVR.
Rapid Eye™ Hybrid LT DVR Installation Guide
Documentation
All Programs
Rapid Eye Hybrid LT x.x.
All Programs
publication title (choose
Rapid Eye™ Hybrid
Guide, for more
23
Advertisement
Table of Contents
