Honeywell Rapid Eye Hybrid LT Installation Manual page 4

Revisions
Issue Date
A 11/10
V1 Rev A 02/11
V2 Rev A 09/2011
V3 Rev A 03/2012
V4 Rev A 01/2013
4
Revisions
New document, based on 800-02607V3, rev A for Rapid Eye Multi-Media, V9.
Revision of 800-07766, Rev A. No major content changes. Changes include PAL RE LT
units no longer supporting the internal modem.
The Installation guide has been revised to include Hybrid support of IP cameras with
the Rapid Eye Hybrid LT unit. Some other minor feature changes have also been
added to this document.
Document updated for the latest Rapid Eye Hybrid LT V10.1 software release. This
V10.1 software release adds Honeywell Performance IP, equIP
and support for a few ONVIF IP cameras. Some other features have been added, such
as automatic IP camera discovery, to the Rapid Eye system.
The Recovery boot option is added to the installation chapter of the document.
Language around ONVIF cameras cleaned up to make clear only some ONVIF IP
cameras have been tested and are supported.
® ®
1080p, equIP WDR,