Name And Function Of The Projector; Rear; Control Panel/Led Indicator - Eiki EK-350U Owner's Manual

Name and function of the projector

Front/top
① ② ③ ④ ⑤ ⑥ ⑦ ⑧

Rear

⑨⑩ ⑪ ⑫ ⑬ ⑭
Bottom
⑮
14
LED indicator (Power / Status / Filter)
①
Remote controller receiver (front)
②
Focus ring
③
Projection lens
④
Zoom ring
⑤
Cover of lens shift ring
⑥
Control panel
⑦
Exhaust vent
⑧
Speaker
⑨
Remote controller receiver (rear)
⑩
Intake vent
⑪
AC power cord connector
⑫
Input / Output terminal
⑬
Speaker
⑭
Adjustable foot
⑮
Note:
Air exhaust emits hot air. DO NOT place
heat sensitive objects near it.
Name and function of the projector
Control Panel
注意高温!
CAUTION HIGH TEMPERATURE
PRECAUCION CALIENTE
APPARECCHIO CALDO
ATTENTION CHAUD
WARNUNG HEISS
고온주의
LED indicator
157.6
• Power / Stand-by
Power on or off the projector
• Left / Right / Up / Down
– Select items or adjust values in the
OSD menu.
161.0
– Select display area in digital zoom+
mode
– Adjust the volume.
• OK
Enter the OSD menu or select options in
138.0
a menu
• Input
Select source of input
• Menu
Open or close the OSD menu
• Auto
Optimize a computer image automatically
• POWER indicator
– The power indicator turns steady red
when the projector is in standby mode
– It turns steady green when the projector
is in normal operation
• STATUS indicator
It flashes orange when internal tempera-
ture of the projector is out of operation
range
• FILTER indicator
It turns orange when the filter requires
cleaning
39.8
15