Highlight Arrays - G-Technology G Speed studio Product Manual

Configuring G-SPEED Studio R

Highlight Arrays

From the Disk Array menu, select the "Locate" button to identify the physical drives
assigned to a disk array. The LEDs on the enclosure will appear purple and flash in sync.
The bays/carriers containing drives that do not belong to the chosen disk array will
not be highlighted.
Back View
Add Back View to the Toolbar by going to the View pulldown menu and selcting
Customize Toolbar. Click and drag "Back View" to the toolbar and press Done. Then
press Back View to see a virtual view of the back of your G-SPEED Studio R. Move the
cursor over the power supply unit (PSU) or system fan to display component status
information.
Device: Back View display menu
Double-click on the unit to activate the blue drive lights.
p. 32