Daisy Chaining Multiple G-Speed Studio R Units - G-Technology G Speed studio Product Manual

2. Launch the G-SPEED Studio R Utility and click on the System Information tab
in the navigation bar. Unlock the user interface (see Unlocking the UI), click on
the Shutdown button then click on Shutdown in the new menu that appears.
You will need to type "CONFIRM" in the pop-up menu and click the Confirm
button.
Alternatively, you can press and hold the power button, located on the back of the units,
until the LED on the front turns off. When you release the power button, the system will
be off and can only be turned on by pressing the power button or removing the power
cord and re-inserting the power cord.

Daisy Chaining Multiple G-SPEED Studio R Units

Up to six G-SPEED Studio R or Thunderbolt-enabled devices can be connected to each
other and to your Mac in a sequential Thunderbolt connection. To daisy chain multiple
Thunderbolt devices to your G-SPEED Studio R, follow these steps:
1. Use a Thunderbolt cable to connect one of the Thunderbolt ports on the back
of your computer to one of the Thunderbolt ports on your G-SPEED Studio R.
2. Use another Thunderbolt cable to connect the second Thunderbolt port on
G-SPEED Studio R with one of the Thunderbolt ports on a second device.
3. Use additional Thunderbolt cables to link subsequent storage enclosures or
Thunderbolt enabled devices into the daisy chain via available Thunderbolt
ports.
Configuring G-SPEED Studio R
p. 23