Table of Contents
Advertisement
Configuring G-SPEED Studio XL
G SPEED
XL
STUDIO
with Thunderbolt™
Highlight Arrays
From the Disk Array menu, select the Locate button to identify the physical drives assigned to a disk
array. The LEDs on the enclosure will appear purple and flash in sync.
The bays/carriers containing drives that do not belong to the chosen disk array will not be highlighted.
Back View
Add Back View to the Toolbar by going to the View pulldown menu and selecting Customize
Toolbar. Click and Drag "Back View" to the toolbar and press Done. Then press Back View to see a
virtual view of the back of your G-SPEED Studio XL. Move the cursor over the power supply unit
(PSU) or system fan to display component status information.
Device: Back View display menu
Double-click on the unit to activate the blue drive lights.
p. 32
Advertisement
Table of Contents
