Changing Transition Settings
To change Transition settings:
1. Click on the Background Activities icon.
2. Click the Settings button.
3. Click the Transition Rate drop-down menu and choose a rate:
• Low: Fewer system resources are available to Transition, leaving more resources
for data read/write operations.
• Medium: Balances system resources between Transition and data read/write
operations.
• High: More system resources are available for Transition and fewer for data
read/write operations.
4. Click the Confirm button.
5. Click the X icon to close the background activities panel.
Synchronization
Synchronization is automatically applied to logical drives when they are created.
Synchronization recalculates redundancy data to ensure that the working data on
the physical drives is properly in sync.
Mouse-over on the logical drive, click the View button, and look under Logical Drive
Information beside the line that says Synchronized. A Yes means that the logical drive
was synchronized.
See Viewing Logical Drive Information.
Configuring G-SPEED Studio R
p. 54