G-Speed Studio R Utility - G-Technology G Speed studio Product Manual

Configuring G-SPEED Studio R

G-SPEED Studio R Utility

G-SPEED Studio R ships preconfigured in RAID 5 and is ready to use out of the box
without configuration. However, G-Technology recommends installing the bundled
G-Technology Assistant utility and the G-SPEED Studio R utility even if you do not plan
to make any changes to device configuration. The applications are useful for monitoring
the system and getting firmware updates. Additionally, the utility is necessary if you
plan to change the enclosure's default RAID configuration (RAID 5) or if you will swap
out any of the pre-installed hard drives.
The G-SPEED Studio R Software utility installation package is available on the
G-Technology website and can be easily downloaded. Follow the instructions below
to easily install the G-SPEED Studio R utility.
1. Visit www.g-technology.com/support to download the G-SPEED Studio R utility.
2. Mount the virtual drive containing the installation software package.*
* The version number of the .dmg file and .pkg file will change as it is updated.
The version number used in this example is for illustration purposes.
p. 18