Formatting Your Logical Drive; Locating A Logical Drive - G-Technology G Speed studio Product Manual

Formatting Your Logical Drives
If you left the Format box checked when you created your logical drives, they will be
formatted automatically.
If you Unchecked the Format box, you must format your logical drives manually.
See Formatting Logical Drives.
When the G-SPEED Studio R Utility finishes formatting, new drive icons, each
representing one logical drive, will appear on your desktop (right).
When you see the icon, your logical drive will be ready to use.

Locating a Logical Drive

This feature causes the drive carrier LEDs to flash for one minute to assist you in locating
the physical drives that make up a logical drive.
To locate a logical drive:
1. Click the Logical Drive icon. The list of logical drives will appear.
2. Mouse-over the logical drive you want, then click the Locate button. The drive power /
status LEDs for the physical drives that make up the logical drive will blink blue for one
minute.
Running the Locate function to identify a disk array:
Configuring G-SPEED Studio R
Drive power/status
LEDs blink blue
p. 84