Running a Transition
To run a Transition on a revertible spare drive:
1. Click on the Background Activities icon. The list of background activities will appear.
2. Mouse-over Transition, then click the Start button.
3. Choose a Source Physical Drive. The Source Physical Drive is the revertible spare drive
that is now part of the disk array. Source Physical Drives are identified by their disk array
and sequence numbers within the disk array.
4. Choose a Target Physical Drive. The Target Physical Drive is the drive that replaces the
revertible spare. Target Physical Drives are identified by their physical drive ID number.
5. Click the Confirm button.
Pausing and Resuming a Transition
To pause or resume a Transition:
1. Click on the Background Activities icon. The list of background activities will appear.
2. Mouse-over Transition, then click the Pause or Resume button.
Stopping, Pausing or Resuming a Transition
To stop/cancel a Transition:
1. Click on the Background Activities icon. The list of background activities will appear.
2. Mouse-over Transition, then click the Stop button.
3. Click the Confirm button.
Configuring G-SPEED Studio R
p. 94