Viewing Physical Drive SMART Log Information
To view physical drive SMART Log information:
1. Click the Physical Drive icon.
2. Mouse-over the physical drive you want, then click the View button.
3. Click the SMART Log tab.
SMART Log information includes:
• Physical Drive ID
• SMART Support – Yes or No, depending on the drive
• SMART Status – Enabled or disabled *
• SMART Health Status – OK is normal
*Adjustable under Changing Controller Settings.
4. Click the X icon to close the settings panel.
Locating a Physical Drive
This feature causes the drive carrier LEDs to blink for one minute to help you locate the
physical drive.
To locate a physical drive:
1. Click the Physical Drive icon.
2. Mouse-over the physical drive you want, then click the Locate button. The drive
power/status LED for the drive carrier holding that drive will blink blue for one minute.
Configuring G-SPEED Studio R
p. 59