Warning LED and Alarms
The G-SPEED Studio R enclosure integrates an audible alarm or buzzer that will sound
when any of the following conditions exist:
Internal temperature exceeds a temperature of 60°C.
Main cooling fan fails
Fan slows to a state where the fan can no longer adequately cool the system
To silence the alarm, push the Alarm Mute button located on the back of
G-SPEED Studio R as shown below.
Alarm Mute Button
In addition to the audible alarm, the LED located on the front G-SPEED Studio R
will illuminate red.
If there is an issue with G-SPEED Studio R drive module, the LED on the
module will glow red indicating a drive or RAID issue. Please launch the
G-SPEED Studio R Utility to determine if any user action is required or contact
our support team for further troubleshooting.
Alarm Mute button
If you hear an audible alarm and see the red warning LED on G-SPEED Studio R front,
stop using the enclosure and contact
Configuring G-SPEED Studio R
Drive Module LED (red)
indicating an issue
G-Technology
support.
p. 13