Formatting Your Logical Drives; Changing Disk Array Settings - G-Technology G Speed studio Product Manual

3. Click the Next button to continue. The Summary screen will display.
Task 4 – Summary
1. Review your choices of disk array, logical drives and spare drive.
• To make any changes, click the Back button to reach the appropriate screen.
• To accept, click the Submit button. Creating the disk array, logical drive and
spare drive will take a few moments.
2. Click the Finish button to close the Wizard.

Formatting Your Logical Drives

If you left the Format box checked under Task 2 – Logical Drive Creation, your logical
drives will be formatted automatically.
If you unchecked the Format box, you must format your logical drives manually.
When the G-Technology Utility finishes the partition and format operation, new removable
drive icons, each representing one logical drive, will appear on your desktop. When you
see these icons, your new logical drive(s) will be ready to use.

Changing Disk Array Settings

To make disk array settings:
1. Do one of the following actions:
• From the Dashboard window, click the Disk Array link.
• From the Storage menu, choose Disk Array.
2. Mouse-over the disk array you want, then click the Settings button.
Configuring G-SPEED Studio R
p. 73