Changing Physical Drive Smart Log Settings - G-Technology G Speed studio Product Manual

To change individual physical drive settings:
1. Click the Physical Drive icon.
2. Mouse-over the physical drive you want, then click the Settings button.
3. Make changes as needed:
• Enter, change or delete the alias in the Alias field.
• Choose Unconfigured or PassThru Configuration.
• Unconfigured drives are not visible to your computer. You will use these to
make disk arrays. PassThru drives are visible to your computer and are configured
as individual drives. They cannot be used to make a disk array.
4. Click the Save button.
5. Click the X icon to close the settings panel.

Changing Physical Drive SMART Log Settings

To change physical drive SMART log settings:
1. Click the Physical Drive icon.
2. Mouse-over the physical drive you want, then click the Settings button.
3. Click the SMART Log Settings tab.
4. Check the box to enable the SMART log.
5. Click the Save button.
6. Click the X icon to close the settings panel.
Configuring G-SPEED Studio R
p. 61