Warning Led And Alarms - G-Technology G SPEED STUDIO XL Product Manual

G SPEED
STUDIO
with Thunderbolt™

Warning LED and Alarms

The G-SPEED Studio XL enclosure integrates an audible alarm or buzzer that will sound when any of
the following conditions exist:
• Internal temperature exceeds a temperature of 60°C.
• Main cooling fan fails
• Fan slows to a state where the fan can no longer adequately cool the system
• To silence the alarm, push the Alarm Mute button located on the back of G-SPEED Studio XL
as shown at below.
• In addition to the audible alarm, the LED located on the front G-SPEED Studio XL will
illuminate red.
• If there is an issue with a G-SPEED Studio XL drive module, the LED on the module will
glow red indicating a drive or RAID issue. Please launch the G-SPEED Studio Software
Utility to determine if any user action is required or contact our support team for further
troubleshooting.
Alarm Mute button
If you hear an audible alarm and see the red warning LED on G-SPEED Studio XL front, stop using the
enclosure and contact
XL
Alarm Mute Button
G-Technology support.
Using Your Drive
Drive Module LED (red)
indicating an issue
p. 13