Midi Cc Assign - Korg wavestate Owner's Manual

Utility
Convert Position = Post-MIDI
wavestate built-in keyboard
Knob Mode
[Scale, Jump]
When you switch to a new Performance or select a different Layer, Wave Sequence Lane, Effect, Envelope, LFO, etc.,
the parameter values "underneath" the front-panel knobs will change—but the physical knobs won't move
automatically. Knob Mode controls what happens when you move a knob.
Scale: This is the default. The physical position of the knob is mapped to the current parameter value. Moving the knob
counter-clockwise goes from the current value to the minimum; moving clockwise goes from the current value to the
maximum. If you turn the knob all the way to the left or right, the range is reset. See the graphic below.
Jump: When a knob is moved, the parameter value instantly changes to match the position of the knob.
Knob Mode set to Scale
Initial knob position
Range is scaled around initial position
Current value:
80
40
0 100

MIDI CC Assign

You can control Scale Select and each Mod Knob directly from MIDI CCs. These CCs edit the assigned parameters,
just like moving the front-panel knobs. To modulate a parameter with variable intensity, and without causing edits to
the sound, use modulation instead. Some dedicated CCs cannot be assigned (CCs 1, 7, etc.).
ENTER or >) to jump forward or back by five parameters at a time.
Use + cursor (<
Function
Scale Select
Performance Mod Knobs 1...8
Layer A Mod Knobs 1...8
Velocity
Curve = 4
No
Transpose
Transmitted
Knob moved to minimum
Range is reset to even distribution
Knob position
90
25
Current value:
Default CC assignment
9
24...31
80...87
MIDI In
Scale
MIDI Out
Knob position
50
75
0
100
78
Velocity
Curve
Transpose
generator
Note Number changes
Received
Tone