Midi Cc# Map (Midi Control Change No. Map) - Korg R3 Owner's Manual

44. MIDI CC# MAP
Here you can assign control change numbers to the most important parameters corresponding to the front panel buttons and knobs [1]–[4].
When you use the Performance Edit function or edit a program, the control change you assign here will be transmitted when you operate the
corresponding knob for each parameter. When the R3 receives one of these control change messages, the value of the corresponding parameter
will change. (☞ Supplementary material on the CD-ROM: "Control change assignments for the R3's knobs/buttons")
Knob [1]
Parameter [Portamnt...VcdFmtNo]
Select the knob or button.
(MIDI Control Change No. Map)
Knob [2]
Value [NoAssign, CC#000...CC#095,
CC#102...CC#119]
Assign a MIDI control change number
(CC#) for the knob or button selected in
"Parameter" (knob [1]).
If the selected value is already as-
signed to another parameter, an "*" is
shown at the right of the value.
The MIDI channel for vocoder param-
eters will be the same MIDI channel
as timbre1.
71