Requirements & Specs; System Requirements And Specifications - Ricoh GlobalScan Administrator's Manual

A p p e n d i x A :
A p p e n d i x A :
The following GlobalScan Server and MFD requirements must be met prior to installation of the
GlobalScan system:
GlobalScan Server*:
§
®
Microsoft Windows
2003, Standard Edition, with IIS 6 installed, and ASP extension and parent paths manually
enabled; and all necessary security updates and patches installed
Note: If Novell authentication or Scan to Novell shared folder is required, and
server is running Windows Server 2003, Standard Edition, please refer to
Appendix H: Novell with Windows 2003 Server for special configuration
instructions
§
MSXML 3.0 (SP5 required)
§
ADSI 2.5 installed
§
Internet Explorer 6.0 or IE 6.0 with Service Pack 1
§
Intel Pentium class processor (CPU), 1GHz or faster
§
1GB RAM or more (Important: If OCR is running on the same server as GlobalScan, it is
recommended that 2 gigabytes of RAM is installed)
§
40GB hard drive or larger
§
10/100 Mbps network card
§
TCP/IP network access
§
Access to Global Address Book via LDAP
§
E-mail capability through one or more of the following mail systems:
- Lotus Notes 5 / 6.5 (Important: An additional procedure is required in order for GlobalScan to support
Lotus Notes 6.5. Please refer to Appendix G: Lotus Notes 6.5 Support for configuration instructions)
- Microsoft Exchange 5.5, 2000, 2003
- Most SMTP Servers
§
CDO (Collaborative Data Objects) V1.1 (For Microsoft Exchange only, please refer to Appendix F:
CDO.dll Install Procedures )
Compatible Multifunctional
MFD Type* Engine Speed
Black & White 22 – 45 cpm
Black & White 60 – 105 cpm
Color/B&W 12 – 38 cpm
* GlobalScan firmware requires GW architecture-supported MFD with VAS installed.
** 96MB is minimal requirement for GlobalScan. 192MB or above is recommended for optimal performance.
192MB is minimal requirement when running an optional GlobalScan Framework, i.e., DMS application.
Important: Please refer to the specific MFD model's Firmware Release Notes for additional information.
Compatible MFDs must be equipped with...
n
Network Interface Board (NIB) option
n
Local hard drive
n
TCP/IP network access
* Note:
-
One GlobalScan Server can support up to 250 enabled MFDs.
-
GlobalScan requires a dedicated server PC. Running other applications on the server may cause
serious problems and service performance is not guaranteed.
S y s t e m R e q u i
S y s t e m R e q u
®
2000 Server with Service Pack 4 and IIS 5.0 installed or Windows
Devices:
Memory
96MB**
256MB
256MB
r e m e n t s a n d
i r e m e n t s a n d
TM
GlobalScan Ver. 2.0
Administrator's Guide
S p e c i f i c a t i o n s
S p e c i f i c a t i o n s
®
Server
I B M C o m p a t i b l e
81