Step 3: Gs V1.5 Settings; Step 3: Enter/Edit Globalscan V1.5 Settings (If Applicable) - Ricoh GlobalScan Administrator's Manual

Step 3: Enter/Edit GlobalScan V1.5 Settings
GlobalScan V2.0 is backward compatible with MFDs running GlobalScan firmware Version
1.5. The GlobalScan V1.5 screen, shown below, is profile-independent, which means MFDs
running V1.5 firmware do not access projects defined under a profile, as does V2.0. Only
MFD authentication settings and Services applied here will be executed on an MFD running
V1.5 firmware. To establish these settings, proceed as outlined below.
Note: If all MFDs are running GlobalScan Version 2.0 firmware, please proceed to Step 4: Enter/Edit System
Parameters.
1. Click GS 1.5 Settings.
Display reads...
A. MFD Authentication, if applicable, select the authentication method from the drop-down
menu.
•
None – The MFD user is not required to enter a user name, password, etc.
•
NT and Novell
at right.
Note: Novell configuration is always available on the profile level, so
MFDs running GlobalScan Ver. 1.5 firmware will use the profile's
Novell settings.
– Screens appear similar to that shown
Grayed-out settings
indicate the Service is
always available
A
B
Note: All Category 3 Services designed
around the GlobalScan Ver.1.5 SDK that
require authentication (i.e., have login ASP
page), for example, FileNET, will also display
TM
GlobalScan Ver. 2.0
Administrator's Guide
(if applicable)
50