Ricoh GlobalScan Administrator's Manual page 109

Restore GlobalScan Data
To restore registry data, proceed as follows...
1. Locate and double-click on the
2. Locate Backup File
Display reads...
3. Click Restore.
Display reads...
4. Click OK, then Close.
The registry data has been applied.
Verification
Open GlobalScan Ver. 2.0 Admin Module (refer to GlobalScan V2.0 Administrator's Guide, if
necessary) and verify that the data has been successfully
GSBackup.exe
name.
file on your GlobalScan CD.
restored.
TM
GlobalScan Ver. 2.0
Administrator's Guide
109