Mfd Configuration; M U L T I F U N C T I O N A L D E V I C E C O N F I G U R A T I O N - Ricoh GlobalScan Administrator's Manual

M u l t i f u n c t i o n
M u l t i f u n c t i o
When the GlobalScan firmware is installed, a service technician establishes configuration
settings. It is recommended that only the GlobalScan System Administrator adjust these
settings.
To access and enter configuration settings, proceed as follows:
1. Press the Scanner
Note: If you are currently logged in, press the Logout button.
The next screen to appear depends on how many projects are configured and whether
or not login is required. See Before Getting Started, Projects, for details.
2. On the MFD control panel, press and hold the
seconds), then release.
Display reads, for example...
Setting
GlbScan Server
(Required)
Proxy Server
DNS IP
HTTPS
Proxy Port
Proxy Username
Proxy Password
1
A control panel key other than the Scanner key may access GlobalScan. Please refer to the GlobalScan
firmware Release Notes to learn more.
a l D e v i c e C
n a l D e v i c e C
1
key on the MFD control panel (once or twice).
GlobalScan V2.0 Configuration Screen
The Server IP address of the GlobalScan Server or the DNS Name (entry
of DNS Name requires entry of fully-qualified DNS IP)
Proxy Server IP Address
DNS IP may or may not appear; depends on MFD model
HTTPS On/Off.
Proxy Server Port Number
User Name for access to Proxy Server
Password for access to Proxy Server
o n f i g u r a t i o n
o n f i g u r a t i o n
Clear/Stop key (for more than 5
Description
TM
GlobalScan Ver. 2.0
Administrator's Guide
14