Smartdevicemonitor For Client (Web Image Monitor) Utility - Ricoh GlobalScan Administrator's Manual

Manage MFDs Cont'd
2. Click Add Machine
Display reads...
3. Enter Serial Number.
4. Select Profile ID
5. If applicable, select
6. Enter IP Address
7. Click Save button or

SmartDeviceMonitor for Client (Web Image Monitor) Utility

From the Manage MFDs
Image Monitor) utility, i.e., view real-time status and settings of the device. For information on
installation of SmartDeviceMonitor for Client.exe file, please refer to the GlobalScan Server
Software Installation Guide, Appendix B.
Note: Some features of Web Image Monitor can only be accessed if the Administrator ID (User Name) and
Password is known.
1. Click Serial Number.
Note: These entries are automatically populated based on device/server settings and cannot be edited.
button at bottom of Manage MFDs screen.
from drop-down menu.
Enable check box.
of the MFD.
Cancel to exit without saving.
screen, it is possible to link to the MFD's SmartDeviceMonitor (Web
TM
GlobalScan Ver. 2.0
Administrator's Guide
62