Ricoh GlobalScan Administrator's Manual page 46

Services Tab Cont'd
B. Render (OCR) Cont'd
•
OCR Default
Note: The GlobalScan user can override the default language setting by selecting another
language setting on the MFD "Scan Settings" screen. The default value (chosen above) is
restored after the user logs out (or after MFD timeout). Also note that the OCR default
language is only supported by MFDs with GlobalScan Ver. 2.0 firmware.
•
OCR Heartbeat
engine heartbeat folder. This path must match the heartbeat folder path on
the OCR engine (File Conversion Program screen shown on next page).
•
OCR Heatbeat Interval (minutes):
often to check for the lastest time stamp (of the heartbeat file) created by the
OCR engine.
What is a Heartbeat?
heartbeat is a file named
"heartbeat.dat" located in the
OCR heartbeat folder generated
by the OCR engine (File
Conversion Program) that
GlobalScan's Job Monitor
Service examines in order to
determine whether or not OCR is
up and running. If GlobalScan
does not see the updated time
stamp of the "heartbeat.dat" file,
at the specified interval, an error
condition occurs, telling the administrator that OCR is not operational.
Note: The heartbeat interval set within the profile (above screen) should be greater
(e.g., 10 minutes) than the heartbeat interval set within the OCR File Conversion screen
(e.g., 5 minutes), screen on next page.
Language: Click this drop-down to select another language.
Folder: Enter the path that links GlobalScan to the OCR
A
This setting informs GlobalScan how
TM
GlobalScan Ver. 2.0
Administrator's Guide
46