Step 4: Enter/Edit Parameters; Step 4: Enter/Edit System Parameters - Ricoh GlobalScan Administrator's Manual

Step 4: Enter/Edit System Parameters
After you have created a profile (see Step 2: Add/Edit a Profile), you can configure the
GlobalScan system. Simply click the
the GlobalScan home page. The System Parameters screen appears, enabling you to
establish the general settings to control MFD functionality on the network.
A
B
C
D
E
F
G
H
I
J
K
L
1. Enter the following information based on your system requirements.
A. GlobalScan License Type
GlobalScan is operating, as identified on the CD key which comes with the purchase of
GlobalScan, e.g., (01) Trial, Demo; (05) Permanent [Standalone]; (03) Permanent
[Primary]; or (04) Permanent [Secondary].
Note: Standalone refers to a single GlobalScan Server installation, while primary and secondary reflect
Failover where two GlobalScan Servers are synchronized, allowing a secondary server to automatically
take over should the primary server go down, maximizing uptime.
Server System
– This field identifies the type of license under which
Sample CD Key: JBVTXUI
GlobalScan
Administrator's Guide
shortcut or Parameters
05
0000085
TM
Ver. 2.0
menu link on
53