Ricoh GlobalScan Administrator's Manual page 57

Manage Services
A. Post-Render Settings / Information
•
Login: Displays a "Configure" button that enables login synchronization, allowing
a single set of credentials to provide access to shared Services. Having the same
login credentials across several Services will allow those Services to co-exist on
the same project. Using NT/FileNET, shown in screen below, when the MFD is
set to NT authentication, after user successfully logs in, he/she will also be able
to access FileNET as well, because GlobalScan is validating NT and FileNET
user credentials simultaneously.
Click Configure
Select the required setting(s), then click Update.
Important: Indicating that user credentials are in-sync between Services does
NOT guarantee that all users' credentials are, in fact, the same; or that all the
users defined in one Service must necessarily exist in another Service. When
any of the check boxes are checked on this screen, it simply implies that the
administrator expects users who will be using a project combining more than one
authenticating method to have the same ID and password in all authenticating
Services included in the project. When the user tries to log in to GlobalScan, the
actual credential validation will be performed across all authenticating Services
within the project.
Scenario:
1. If a project authenticates to NT/Novell/LDAP, and FileNET shares
authentication with these, and the project allows for Scan To Folder, users
can Scan to Home folders (if known). Additionally, authentication is explicitly
checked against NT/Novell/LDAP and FileNET.
Cont'd
Cont'd:
and display reads, for example...
TM
GlobalScan
Administrator's Guide
Login Synchronization Page
This screen lists 3 network
authentication modes (NT,
Novell and LDAP) and an
additional Service (Livelink)
that requires authentication
Ver. 2.0
57