Fuse Requirements - Elation PowerSpot 575IE User Manual

Power Spot 575IE™
2.8

Fuse Requirements

The POWER SPOT 575IE electronic and lamp systems are protected by two G M A
(5x20mm) external fuses:
Lamp: 250V/8A
Electronics: 250V/1A
The fuse requirements are clearly printed on the side of the fixture.
WARNING:
• Always disconnect main power before changing the fuse!
• Always replace with the exact same type fuse unless otherwise
specified by an authorized Elation
anything other than the specified fuse can severely damage your fixture
and will void your manufactures warranty.
2.9
Transportation and Handling
The POWER SPOT 575IE ™ comes with two carrying handles built into the base.
Always transport the fixture by these handles. Never lift or carry the POWER SPOT
575IE™ by the yoke (head assembly) this can seriously damage the unit.
©Elation Professionals® Los Angeles, Ca.
service technician. Replacing with
®
- wwww.ElationLighting.com
15
- Page