Preparation And Installation; Mounting; Clamps - Elation PowerSpot 575IE User Manual

Power Spot 575IE™
2.

Preparation and Installation

2.1 Mounting

The POWER SPOT 575IE™ is fully operational in two different mounting positions,
hanging upside from a ceiling or set on a flat level surface. To avoid internal damage to
the unit, never mount the unit on its side as illustrated below. Be sure this fixture is
kept at least 0.5m away from any flammable materials (decoration etc.). Install a safety
cable that can hold at least 10 times the weight of the fixture. Never use the carrying
handles for secondary attachment.

2.1.1 Clamps

The POWER SPOT 575IE™ has been designed to hold multiple clamps to the
bottom of the unit in several different orientations. Always use an appropriately
rated clamp to mount this unit to truss. Refer to the printed instructions on the
bottom of the fixture for proper clamp installation.
a) Cam lock System: This system allows a quick and efficient means to secure
a clamp to the unit. To attach a clamp to the unit, attach a clamp that is rated to
handle the weight of the unit to your cam lock. After a clamp has been
©Elation Professionals® Los Angeles, Ca.
Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE
0711-217 for proper installation in Europe
To ensure proper installation, only qualified staff should
attempt installation.
- wwww.ElationLighting.com
11
- Page