Lamp On/Off (Lamp); Reset (Rese) - Elation PowerSpot 575IE User Manual

Power Spot 575IE™
3.3 The Audio Program
Audi
The Audio menu allows you to run a stand-alone audio program. This program can run
AFST
either fast (
sound impulse will trigger a new step. (
fixtures together at once to achieve a synchronized light show running to sound in a
Master/Slave configuration. To run in a Master/Slave.
Additionally you can choose a basic position for this audio chaser. Use either the internal
manual mode or an external DMX controller to set the desired Pan/Tilt position. Confirm
this setting in the
You can also set the size of the audio chaser in the
between: NORM (no basic position has to bee chosen), 'BIG', 'MIDL' and 'SMAL').
If you want to run several units in a Master/Slave system be sure designate your first unit
in the chain as the master. All others must be "Slave" Master = OFF. Notice: The Audio
function is only working if no DMX is connected.
3.4 Lamp On/Off
LAMP
This function allows you to manually control the lamp operation. Access the lamp function
in the main menu and use the use the Up and Down buttons to toggle between lamp
On
and lamp
to cancel and return to the main menu. (The lamp
when the shutter is closed at the same time).
3.5 Reset
RESE
©Elation Professionals® Los Angeles, Ca.
Aslw
) or slow ( ); Fast (
SVPT
menu by pressing the Enter button.
Off.
Press the Enter button to confirm the operation or the Mode button
AFST
): When running in "fast" mode every
Aslw
): When running in You may run several
SIZE
OFF
command will only functions if and
- wwww.ElationLighting.com
menu. You have the choice
- Page
18