Fuse Replacement - Elation PowerSpot 575IE User Manual

Power Spot 575IE™
7.

Fuse Replacement

Caution: Always replace with the exact same type fuse, unless otherwise specified by an
authorized Elation service technician. Replacing with anything other than the specified part can
®
damage your unit and will void your manufactures warranty.
Warning: If you continue to blow fuses, STOP using the fixture. Contact customer support for
further instructions, you may have to return the unit for servicing. Continuing to use the unit may
cause serious damage.
Fuse Replacement: Locate and remove the unit's power cord from the main power supply.
Once the cord has been removed located the fuse holders located on the side panel near the
power input connection. Using a flat-head screwdriver unlock the fuse holder from its' housing
by turning the holder in a counter-clockwise direction. Once the fuse holder has been unlocked,
pull back on the fuse holder holder to expose the fuse. Gently pull out the bad fuse and
discard of it properly and replace it with an exact match. Reassemble in reverse order.
36
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page