Fuse Replacement - Elation Power Spot 575IE II User Manual

Lighting fixtures

Table of Contents

Power Spot 575IE II™

10. FUSE REPLACEMENT

Caution: Always replace with the exact same type fuse, unless otherwise specified by an

authorized Elation

service technician. Replacing with anything other than the specified

part can damage your unit and will void your manufactures warranty.

Warning: If you continue to blow fuses, STOP using the fixture. Contact customer support

for further instructions, you may have to return the unit for servicing. Continuing to use the

unit may cause serious damage.

Fuse Replacement: Locate and remove the unit's power cord from the main power

supply. Once the cord has been removed located the fuse holders located on the side

panel near the power input connection. Using a flat-head screwdriver unlock the fuse

holder from its' housing by turning the holder in a counter-clockwise direction. Once the

fuse holder has been unlocked, pull back on the fuse holder holder to expose the fuse.

Gently pull out the bad fuse and discard of it properly and replace it with an exact match.

Reassemble in reverse order.

wwww.ElationLighting.com

Page

Table of Contents