Fixture Menu - Elation PowerSpot 575IE User Manual

Power Spot 575IE™
3.

Fixture Menu

The control panel located on the side of the fixture allows you to access
the main menu and make all necessary adjustments to the P O W E R
SPOT 575IE™. During normal operation, tapping the "MODE" key
once will access the fixture's main menu. Once in the main menu you
can navigate through the different functions and access the sub-menus
with the Up and Down buttons. Once you reach a field that requires
adjusting, tap the ENTER button to activate that field and use the UP
and Down button to adjust the field. Tapping the Enter button once
more will confirm your setting. Once a setting is saved the LED will
briefly readout OK to confirm a new setting has been made and locked
into memory. You may exit the main menu at any time without making
any adjustments by tapping the MODE button.
Level 1 Level 2
D001
TEST
AUDI ASLW
AFST
MSTR
SVPT
SIZE
LAMP
RESE
TIME P O W R
LA1
LA2
RPAN
RTLT
SPEC MANU
LAAU
DLOF
DMXI
D I S P
TEMP
FANS
ADJU
©Elation Professionals® Los Angeles, Ca.
Level 3
Remark
Define the DMX start address
Test program of all functions
Self-running audio program (slow)
Self-running audio program (fast)
Master for the audio program
Basic position for the audio program
Size for the audio program (NORM-BIG-MIDL-SMAL)
Switch on/of the lamp direct at the Power Spot 575IE
Reset
Running time of the fixture (non destructible)
Running time of the lamp (erasable)
Running time of the lamp (non destructible)
Reverse Pan-direction
Reverse Tilt-direction
Manual control of all device functions
Automatic lamp start
Switch off lamp via DMX
Reed out actual DMX-values
D ON Display On/Off
REV Flip display readout
Displays internal temperature
HIGH Maximum cooling fan velocity
REG Automatic cooling fan control
L O O F
Low cooling fan speed  lamp off
LOHI
Low cooling fan speed  automatic
CODE These menu settings are reserved for authorized
x x x x technician use only and are protected by a user code.
COLO Calibration of the color wheel
GOB1 Calibration of gobo wheel 1
GOB2 Calibration of gobo wheel 2
SHTR Calibration of the shutter
P R I S Calibration of the prism wheel
I R I S Calibration of the IRIS
POFS Calibration of the pan-offset
TOFS Calibration of the tilt-offset
clre Clears internal memory (technician only)
ares Adjust Reset (wheels static after reset)
VTIL Software version, tilt pc-board
- wwww.ElationLighting.com
MODE ENTER DOWN UP
MODE ENTER DOWN UP
Display
16
- Page