Elation Professionals® Los Angeles, Ca. - Wwww.elationlighting.com; Default Settings (Dfse) - Elation PowerSpot 575IE User Manual

Power Spot 575IE™
VTR1
VTR2
3.9.9 Default Settings
DFSE
This function is used to restore all the factory default settings and presets. Press
the Enter button to confirm this operation or the Mode button to cancel and return
to the menu. When this operation is selected the LED will briefly readout
then return to the previous function. The chart below details the factory defaults.
Function
DMX Address
Pan reverse
Tilt reverse
Automatic lamp on
Lamp on via DMX
Display
Cooling fan
Feedback
3.9.10 Feedback "APC"
FEED
The POWER SPOT 575IE™ is equipped with "APC," automatic position
correction. This function automatically corrects the Pan and Tilt movement should
the unit lose step or is obstructed and forced to lose step. Press the Enter button
to access the sub-menu. Use the Up and Down buttons to toggle between
"ON" and "OFF" and confirm once more with the Enter button or use the Mode
button to cancel the operation.
3.9.11 Error and Fault Corrections
EFLG
(These functions are reserved for authorized technicians only)
©Elation Professionals® Los Angeles, Ca.
Software version of Head- board
-99 - +99
Software version of Base- board
-99 - +99
Display
D001
RPAN
RTLT
LAAU
DLOF
DISP
FANS
FEED
-
Default Settings
ON
ON
ON

ON

D ON
REG
HIGH


ON
wwww.ElationLighting.com
D001

OFF

OFF

OFF
OFF
LOOF LOHI
OFF
24
- Page
ok
,