Table of Contents
Advertisement
G O B O I N S T A L L A T I O N
WARNING! GOBO REPLACEMENT SHOULD ONLY BE DONE BE A TRAINED TECHNICIAN.
1. Turn OFF power and allow approximately 60 minutes for the fixture to cool down.
2. Before removing panels, place fixture on a stable flat surface in an INDOOR DUST FREE location.
Ensure moving head is locked into place into a neutral upright position, with both PAN and TILT locks engaged.
3. Remove front and back panels; each are secured with (6x) 3mm hex-head screws.
14
Advertisement
Table of Contents
