Gobo Installation - Elation FUZE TEATRO User Manual

G O B O I N S TA L L AT I O N
WARNING: USE CAUTION IN ORDER TO AVOID SCATCHING THE GOBO OR GOBO HOLDER
3. To ensure proper gobo orientation on the gobo wheel, align the alignment indices on the
gobo and gobo holder before installing the retainer spring. These alignment indices take
the form of a notch in the gobo holder, and dots on the gobo holder tab and the gobo it-
self.
Alignment
Indices
4. Rotate the gear of the
gobo wheel until the gear
alignment dot on the bot-
tom of the gobo wheel is
aligned with the empty
gobo holder slot. Insert
the gobo holder tab into
its receptable on the
wheel and press until the
gobo holder clicks into the
empty slot.
1. Locate the gobo that you would like to re-
place. Carefully press down on the gobo
holder to unseat it from its slot in the gobo
wheel, then pull the holder out and away from
the gobo wheel.
2. Locate the tab of the re-
12
tainer spring, then use a
precision pick or similar
took to carefully press the
retainer spring tab inward
to relieve the spring's
tension. Remove the re-
tainer spring and carefully
separate the gobo from the
gobo holder.
Note: The gobo hold-
er should seat se-
curely into a slot in
the gobo wheel, with
gearing on one side
and the retention
tab on the other.