Transferring A Call In Progress; Accepting A Call For Another Team Member; Joining Or Leaving A Group Call (Not For The Executive Telephone In An Executive/Secretary Team) - Siemens HiPath Series Operating Instructions Manual

Step by Step
Release
Team and Executive/Secretary Functions With Trunk Keys
or With on-hook dialing: Use speakerphone mode (not
available with optiPoint 500 economy and
optiPoint 500 basic).

Transferring a Call in Progress

Press the DSS key and announce the call, if desired.
t
Replace the handset.
or
Press the key.
Accepting a Call for Another Team
Member
Press the flashing DSS key or trunk key.
n
Lift the handset.
or With on-hook dialing: Use speakerphone mode and open
listening (not available with optiPoint 500 economy and
optiPoint 500 basic).
Joining or Leaving a Group Call
(Not for the Executive Telephone in an
Executive/Secretary Team)
By default, your telephone rings when a call arrives on
your line.
If you want your phone to ring even when calls arrive on
other lines, you can turn your ringer on and off for each
line in your group
Your telephone rings (one time only or every four sec-
onds) even when you are engaged in another call (atten-
tion ring volume
Page 87.
Page 26).
97