If You Cannot Reach A Destination; Call Waiting (Camp-On); Busy Override - Joining A Call In Progress - Siemens HiPath 500 Operating Instructions Manual

Making Calls – Convenience Functions
Step by Step
Camp-on
Override?
58

If You Cannot Reach a Destination ...

Call Waiting (Camp-On)

Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Wait (approx. 5 seconds) until "Camp-on" appears on the
display and the busy tone is followed by the ring tone.
The called party can then respond

Busy Override - Joining a Call in Progress

This function is only available if it has been configured
by the service technician (contact your service person-
nel).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Select and confirm.
or
qjf
Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (station
no. or name)".
You can now start talking.
The called party can prevent automatic call
waiting Page 50.
If this feature is configured (contact your service
personnel), you will hear the ring tone and the
message "Camp-on" is immediately displayed.
Page 49