Dialing A Number From The Internal Directory - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Directory?
1=internal?
+
Scroll Next?
Scroll Previous?
Delete Character?
Delete Line?
Call?

Dialing a number from the internal directory

The internal directory contains all station numbers and
system speed-dial numbers assigned to a name. Con-
tact your service personnel to find out if one was confi-
gured for your system.
Prerequisite: Names have been assigned to the station
numbers stored in the system.
^
Lift the handset.
or
n
Press the key shown. The LED lights up.
Confirm.
if nec. If several directories have been configured (not for
HiPath 500):
Confirm.
The first entry is displayed on the screen.
-
or
Scroll to next or previous entry.
or
select and confirm the option shown,
or
select and confirm the option shown.
or
j
Enter the name you want to find, or just the first few let-
ters, using the alphanumeric keypad
if nec.
Select and confirm each letter to be deleted. The last
letter entered is deleted. If all letters are deleted, the
first entry in the directory will be displayed again.
if nec.
Select and confirm the option shown. All entered letters
are deleted, and the first entry in the internal directory
is displayed again.
The entry you wish to dial appears on the screen
Select and confirm the option shown.
Enhanced phone functions
page 13.
37