Choosing The Heat / Cool Mode And Set-Point Temperature Setting - DELTA DORE TYBOX PAC User Manual

Choosing the HEAT / COOL mode and
set-point temperature setting
The comfort and economy set-point temperatures for
the HEAT mode are independent from the comfort and
economy set-point temperatures for the COOL mode.
Turn the knob to .
To set the heat mode, select the HEAT mode:
Selection of the operation mode
for the HEAT / COOL regulation
Confirm
Go on to temperature setting
Comfort
Comfort set-point temperature setting
(from 5 to 30°C in increments of 0.5°C)
Confirm
Go on to temperature setting
Economy
Economy set-point temperature setting
(from 5 to 30°C in increments of 0.5°C)
Confirm
To exit this mode, turn the knob.
- 10 -
Turn the knob to .
To set the cool mode, select the COOL mode:
Selection of the operation mode for
the HEAT / COOL regulation
Confirm
Go on to temperature setting
Comfort
Comfort set-point temperature setting
(from 5 to 30°C in increments of 0.5°C)
Confirm
Go on to temperature setting
Economy
Economy set-point temperature
adjustment
(5 to 30°C in increments of 0.5°C)
Confirm
To exit this mode, turn the knob.
Depending on the system configuration (menu 1-08),
"conf" may be displayed for the
temperature. This set-point temperature cannot be
modified. If this is the case, the Comfort set-point
temperature can be adjusted on your heat emitter
(radiator with thermostatically controlled valve, etc.).
. set-point
- 11 -