Configuring Your Device; Menu Cf01 - Correcting The Temperature Measured; Menu Cf02 Locking The Buttons; Menu Cf03 Not Used - DELTA DORE Tybox 5701FP Quick Start Manual

4. Configuring your device

mode
>10s
❶ Press any button to activate the
display screen.

Menu CF01 - Correcting the temperature measured

This menu is used to correct any difference you have noticed between the displayed temperature and the
measured temperature.
Example: If the temperature displayed by the device is 19°C and the measured temperature is 20°C, input +1°C then
confirm using OK.
Default setting: 0°C
Adjusts from -5°C to 5°C,
in increments of 0.1°C.

Menu CF02 Locking the buttons

This menu allows you to prohibit access to the use of the buttons.
Default setting: changes authorised

Menu CF03 Not used

Please leave the setting at 00.
+ 5°C
- 5°C
mode
❷ Press mode for 10 seconds until
CF01 is displayed.
Access authorised
Access prohibited
mode
❸ Press + or - to adjust the setting,
and on mode to move to the next
menu.
In order to change this setting, the unit
must have been running for at least 2 hours
beforehand.
If locked, the screen will display "----".
To unlock, simultaneously press and hold the
+ and - buttons for 10 seconds.
mode
4